PDS_VERSION_ID = PDS3 RECORD_TYPE = FIXED_LENGTH RECORD_BYTES = 974 FILE_RECORDS = 2437571 ^EDR_INDEX_TABLE = "EDRCUMINDEX.TAB" OBJECT = EDR_INDEX_TABLE INDEX_TYPE = SINGLE INTERCHANGE_FORMAT = ASCII ROWS = 2437571 ROW_BYTES = 974 COLUMNS = 69 OBJECT = COLUMN NAME = VOLUME_ID DATA_TYPE = CHARACTER START_BYTE = 2 BYTES = 10 FORMAT = "A10" DESCRIPTION = "Volume identification" END_OBJECT OBJECT = COLUMN NAME = FILE_NAME_SPECIFICATION DATA_TYPE = CHARACTER START_BYTE = 15 BYTES = 68 FORMAT = "A68" DESCRIPTION = "Path and file name of HiRISE EDR product" END_OBJECT OBJECT = COLUMN NAME = INSTRUMENT_HOST_ID DATA_TYPE = CHARACTER START_BYTE = 86 BYTES = 3 FORMAT = "A3" DESCRIPTION = "Spacecraft hosting the HIRISE instrument, always MRO" END_OBJECT OBJECT = COLUMN NAME = INSTRUMENT_ID DATA_TYPE = CHARACTER START_BYTE = 92 BYTES = 6 FORMAT = "A6" DESCRIPTION = "Intrument that acquired the observation, always HIRISE" END_OBJECT OBJECT = COLUMN NAME = OBSERVATION_ID DATA_TYPE = CHARACTER START_BYTE = 101 BYTES = 15 FORMAT = "A15" DESCRIPTION = "Unique identification associated with an observation. Up to 28 EDR products can be associated with an observation." END_OBJECT OBJECT = COLUMN NAME = PRODUCT_ID DATA_TYPE = CHARACTER START_BYTE = 119 BYTES = 22 FORMAT = "A22" DESCRIPTION = "Unique identification associated with the product" END_OBJECT OBJECT = COLUMN NAME = PRODUCT_VERSION_ID DATA_TYPE = CHARACTER START_BYTE = 144 BYTES = 3 FORMAT = "A3" DESCRIPTION = "Version identification of this product" END_OBJECT OBJECT = COLUMN NAME = HICAL_VERSION DATA_TYPE = CHARACTER START_BYTE = 150 BYTES = 70 FORMAT = "A70" DESCRIPTION = "Version of the HiCal software used to calibrate this EDR in downstream processing." END_OBJECT OBJECT = COLUMN NAME = TARGET_NAME DATA_TYPE = CHARACTER START_BYTE = 223 BYTES = 32 FORMAT = "A32" DESCRIPTION = "Target Name of the observation" END_OBJECT OBJECT = COLUMN NAME = ORBIT_NUMBER DATA_TYPE = ASCII_INTEGER START_BYTE = 257 BYTES = 6 FORMAT = "I6" DESCRIPTION = "Orbit number from start of mission" END_OBJECT OBJECT = COLUMN NAME = MISSION_PHASE_NAME DATA_TYPE = CHARACTER START_BYTE = 265 BYTES = 30 FORMAT = "A30" DESCRIPTION = "Mission Phase at time of observation, such as Primary Science Phase" END_OBJECT OBJECT = COLUMN NAME = RATIONALE_DESC DATA_TYPE = CHARACTER START_BYTE = 298 BYTES = 75 FORMAT = "A75" DESCRIPTION = "Informational note about the observation" END_OBJECT OBJECT = COLUMN NAME = OBSERVATION_START_TIME DATA_TYPE = TIME START_BYTE = 376 BYTES = 24 FORMAT = "A24" DESCRIPTION = "UTC time when HiRISE started the imaging sequence" END_OBJECT OBJECT = COLUMN NAME = OBSERVATION_START_COUNT DATA_TYPE = CHARACTER START_BYTE = 403 BYTES = 16 FORMAT = "A16" DESCRIPTION = "Spacecraft clock count when HiRISE started the imaging sequence" END_OBJECT OBJECT = COLUMN NAME = START_TIME DATA_TYPE = TIME START_BYTE = 422 BYTES = 24 FORMAT = "A24" DESCRIPTION = "UTC time when first image line of target was acquired" END_OBJECT OBJECT = COLUMN NAME = SPACECRAFT_CLOCK_START_COUNT DATA_TYPE = CHARACTER START_BYTE = 449 BYTES = 16 FORMAT = "A16" DESCRIPTION = "Spacecraft clock count when first image line of target was acquired" END_OBJECT OBJECT = COLUMN NAME = STOP_TIME DATA_TYPE = TIME START_BYTE = 468 BYTES = 24 FORMAT = "A24" DESCRIPTION = "UTC time when last image line of target was acquired" END_OBJECT OBJECT = COLUMN NAME = SPACECRAFT_CLOCK_STOP_COUNT DATA_TYPE = CHARACTER START_BYTE = 495 BYTES = 16 FORMAT = "A16" DESCRIPTION = "Spacecraft clock count when last image line of target was acquired" END_OBJECT OBJECT = COLUMN NAME = CCD_NAME DATA_TYPE = CHARACTER START_BYTE = 514 BYTES = 4 FORMAT = "A4" DESCRIPTION = "Name of CCD associated with EDR Product" END_OBJECT OBJECT = COLUMN NAME = CHANNEL_NUMBER DATA_TYPE = ASCII_INTEGER VALID_MINIMUM = 0 VALID_MAXIMUM = 1 START_BYTE = 520 BYTES = 1 FORMAT = "I1" DESCRIPTION = "Channel number associated with image" END_OBJECT OBJECT = COLUMN NAME = FILTER_NAME DATA_TYPE = CHARACTER START_BYTE = 523 BYTES = 13 FORMAT = "A13" DESCRIPTION = "Filter name used in observation, (permitted values: RED, BLUE-GREEN, or NEAR-INFRARED)" END_OBJECT OBJECT = COLUMN NAME = SCAN_EXPOSURE_DURATION DATA_TYPE = ASCII_REAL START_BYTE = 538 BYTES = 9 FORMAT = "F9.4" DESCRIPTION = "The time in microseconds between the generation of successive unbinned lines. (i.e. the time from the start of the exposure of one unbinned line to the start of exposure of the next unbinned line.) The adjustment of this parameter is used to match image line acquisition to the boresight ground velocity. The value is the same for all CCDs for a given observation." END_OBJECT OBJECT = COLUMN NAME = DELTA_LINE_TIME_COUNT DATA_TYPE = ASCII_INTEGER START_BYTE = 548 BYTES = 8 FORMAT = "I8" DESCRIPTION = "Commanded value to achieve the desired SCAN_EXPOSURE_DURATION. SCAN_EXPOSURE_DURATION = 74 + DELTA_LINE_TIME_COUN/16" END_OBJECT OBJECT = COLUMN NAME = BINNING DATA_TYPE = ASCII_INTEGER START_BYTE = 557 BYTES = 2 FORMAT = "I2" DESCRIPTION = "Instrument binning mode (permitted values: 1, 2, 3, 4, 8, 16)" END_OBJECT OBJECT = COLUMN NAME = TDI DATA_TYPE = ASCII_INTEGER START_BYTE = 560 BYTES = 3 FORMAT = "I3" DESCRIPTION = "Number of TDI stages (permitted values: 8, 32, 64, 128)" END_OBJECT OBJECT = COLUMN NAME = TRIM_LINES DATA_TYPE = ASCII_INTEGER START_BYTE = 564 BYTES = 4 FORMAT = "I4" DESCRIPTION = "Number of unbinned lines at the start of an observation that are trimmed from the start of the image. This parameter is use to spatially align the first line of each CCD. The trim-line operation occurs on the instrument" END_OBJECT OBJECT = COLUMN NAME = FOCUS_POSITION_COUNT DATA_TYPE = ASCII_INTEGER START_BYTE = 569 BYTES = 4 FORMAT = "I4" DESCRIPTION = "The DN value of the focus position sensor" END_OBJECT OBJECT = COLUMN NAME = FELICS_COMPRESSION_FLAG DATA_TYPE = CHARACTER START_BYTE = 575 BYTES = 3 FORMAT = "A3" DESCRIPTION = "Identifies if FELICS data compression was applied to the imaging (Permited values: YES, NO)" END_OBJECT OBJECT = COLUMN NAME = STIMULATION_LAMP_FLAG_RED DATA_TYPE = CHARACTER START_BYTE = 581 BYTES = 3 FORMAT = "A3" DESCRIPTION = "Indicates if the Red Light Emitting Diode (LED) was turned on during the observation. The stimulation lamps support calibration activites and are turned off for science observations (permitted values: ON, OFF)" END_OBJECT OBJECT = COLUMN NAME = STIMULATION_LAMP_FLAG_BLUEGREEN DATA_TYPE = CHARACTER START_BYTE = 587 BYTES = 3 FORMAT = "A3" DESCRIPTION = "Indicates if the blue-green Light Emitting Diode (LED) was turned on during the observation. The stimulation lamps support calibration activites and are turned off for science observations (permitted values: ON, OFF)" END_OBJECT OBJECT = COLUMN NAME = STIMULATION_LAMP_FLAG_NEARINFRARED DATA_TYPE = CHARACTER START_BYTE = 593 BYTES = 3 FORMAT = "A3" DESCRIPTION = "Indicates if the near-infrared Light Emitting Diode (LED) was turned on during the observation. The stimulation lamps support calibration activites and are turned off for science observations (permitted values: ON, OFF)" END_OBJECT OBJECT = COLUMN NAME = LOOKUP_TABLE_TYPE DATA_TYPE = CHARACTER START_BYTE = 599 BYTES = 11 FORMAT = "A11" DESCRIPTION = "Type of lookup table that was applied to convert 14-bit pixels to 8-bit pixels. N/A if a lookup table was not used, image remains 14-bit SQUARE ROOT = square root table LINEAR = linear table STORED = stored LUT" END_OBJECT OBJECT = COLUMN NAME = LOOKUP_TABLE_MINIMUM DATA_TYPE = ASCII_INTEGER START_BYTE = 612 BYTES = 11 FORMAT = "I11" DESCRIPTION = "Minimum 14-bit pixel value mapped to 0 DN output pixel. This parameter used only for LINEAR LUT table mode. A -9998 value indicates the minimum value was not used" END_OBJECT OBJECT = COLUMN NAME = LOOKUP_TABLE_MAXIMUM DATA_TYPE = ASCII_INTEGER START_BYTE = 624 BYTES = 11 FORMAT = "I11" DESCRIPTION = "Maximum 14-bit pixel value mapped to 254 DN 8-bit pixels. This parameter used only for the LINEAR LUT table mode. A -9998 value indicates the maximum value was not used" END_OBJECT OBJECT = COLUMN NAME = LOOKUP_TABLE_MEDIAN DATA_TYPE = ASCII_INTEGER START_BYTE = 636 BYTES = 11 FORMAT = "I11" DESCRIPTION = "Median 14-bit pixel value mapped to 128 DN 8-bit pixels. This parameter used only for the SQUARE-ROOT LUT table mode. A -9998 value indicates the table median value was not used" END_OBJECT OBJECT = COLUMN NAME = LOOKUP_TABLE_K_VALUE DATA_TYPE = ASCII_INTEGER START_BYTE = 648 BYTES = 11 FORMAT = "I11" DESCRIPTION = "Pixel spread value. This parameter used only for the SQUARE-ROOT LUT table mode. A -9998 value indicates a K value was not used." END_OBJECT OBJECT = COLUMN NAME = LOOKUP_TABLE_NUMBER DATA_TYPE = ASCII_INTEGER START_BYTE = 660 BYTES = 5 FORMAT = "I11" DESCRIPTION = "Defines which stored LUT to use. This parameter used only for the STORED LUT table mode. A -9998 indicates a table number was not used." END_OBJECT OBJECT = COLUMN NAME = ADC_CONVERSION_SETTINGS DATA_TYPE = ASCII_INTEGER START_BYTE = 666 BYTES = 3 ITEMS = 2 ITEM_BYTES = 1 ITEM_OFFSET = 2 FORMAT = "I1" DESCRIPTION = "Analog to digital waveform sampling timing settings, a vector of two values" END_OBJECT OBJECT = COLUMN NAME = FPA_POSITIVE_Y_TEMPERATURE DATA_TYPE = ASCII_REAL START_BYTE = 670 BYTES = 7 FORMAT = "F7.4" DESCRIPTION = "Temperature of the focal plane array on the +y side" END_OBJECT OBJECT = COLUMN NAME = FPA_NEGATIVE_Y_TEMPERATURE DATA_TYPE = ASCII_REAL START_BYTE = 678 BYTES = 7 FORMAT = "F7.4" DESCRIPTION = "Temperature of the focal plane array on the -y side" END_OBJECT OBJECT = COLUMN NAME = FPE_TEMPERATURE DATA_TYPE = ASCII_REAL START_BYTE = 686 BYTES = 7 FORMAT = "F7.4" DESCRIPTION = "Temperature of the focal plane electronics board" END_OBJECT OBJECT = COLUMN NAME = IEA_TEMPERATURE DATA_TYPE = ASCII_REAL START_BYTE = 694 BYTES = 7 FORMAT = "F7.4" DESCRIPTION = "Temperature of instrument electronics assembly" END_OBJECT OBJECT = COLUMN NAME = IEA_PWS_BOARD_TEMPERATURE DATA_TYPE = ASCII_REAL START_BYTE = 702 BYTES = 7 FORMAT = "F7.4" DESCRIPTION = "Temperature of the instrument electronics assembly power suppy board" END_OBJECT OBJECT = COLUMN NAME = CPMM_PWS_BOARD_TEMPERATURE DATA_TYPE = ASCII_REAL START_BYTE = 710 BYTES = 7 FORMAT = "F7.4" DESCRIPTION = "Temperature of the CPMM Power supply board" END_OBJECT OBJECT = COLUMN NAME = IMAGE_LINES DATA_TYPE = ASCII_INTEGER START_BYTE = 718 BYTES = 6 FORMAT = "I6" DESCRIPTION = "Number of image lines (rows)" END_OBJECT OBJECT = COLUMN NAME = LINE_SAMPLES DATA_TYPE = ASCII_INTEGER START_BYTE = 725 BYTES = 4 FORMAT = "I4" DESCRIPTION = "Number of line samples (columns)" END_OBJECT OBJECT = COLUMN NAME = SAMPLE_BITS DATA_TYPE = ASCII_INTEGER START_BYTE = 730 BYTES = 2 FORMAT = "I2" DESCRIPTION = "The number of bits per pixel (Permitted values: 8, 16)" END_OBJECT OBJECT = COLUMN NAME = SCALED_PIXEL_WIDTH DATA_TYPE = ASCII_REAL START_BYTE = 733 BYTES = 17 FORMAT = "F17.14" DESCRIPTION = "The cross-scan image resolution in meters/pixel at the center of the Observation" END_OBJECT OBJECT = COLUMN NAME = EMISSION_ANGLE DATA_TYPE = ASCII_REAL START_BYTE = 751 BYTES = 8 FORMAT = "F8.5" DESCRIPTION = "The emission angle at the center of the observation" END_OBJECT OBJECT = COLUMN NAME = INCIDENCE_ANGLE DATA_TYPE = ASCII_REAL START_BYTE = 760 BYTES = 7 FORMAT = "F7.4" DESCRIPTION = "The incidence angle at the center of the observation" END_OBJECT OBJECT = COLUMN NAME = PHASE_ANGLE DATA_TYPE = ASCII_REAL START_BYTE = 768 BYTES = 8 FORMAT = "F8.4" DESCRIPTION = "The phase angle at the center of the observation" END_OBJECT OBJECT = COLUMN NAME = IMAGE_CENTER_LATITUDE DATA_TYPE = ASCII_REAL START_BYTE = 777 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "The planetocentric latitude of the center of the observation" END_OBJECT OBJECT = COLUMN NAME = IMAGE_CENTER_LONGITUDE DATA_TYPE = ASCII_REAL START_BYTE = 788 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "The east longitude of the center of the observation" END_OBJECT OBJECT = COLUMN NAME = MINIMUM_LATITUDE DATA_TYPE = ASCII_REAL START_BYTE = 799 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "The minimum planetocentric latitude of the observation" END_OBJECT OBJECT = COLUMN NAME = MAXIMUM_LATITUDE DATA_TYPE = ASCII_REAL START_BYTE = 810 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "The maximum planetocentric latitude of the observation" END_OBJECT OBJECT = COLUMN NAME = MINIMUM_LONGITUDE DATA_TYPE = ASCII_REAL START_BYTE = 821 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "The minimum longitude of the observation" END_OBJECT OBJECT = COLUMN NAME = MAXIMUM_LONGITUDE DATA_TYPE = ASCII_REAL START_BYTE = 832 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "The maximum longitude of the observation" END_OBJECT OBJECT = COLUMN NAME = SPACECRAFT_ALTITUDE DATA_TYPE = ASCII_REAL START_BYTE = 843 BYTES = 8 FORMAT = "F8.3" DESCRIPTION = "Spacecraft altitude at image center in kilometers on the MRO ellipsoid reference" END_OBJECT OBJECT = COLUMN NAME = TARGET_CENTER_DISTANCE DATA_TYPE = ASCII_REAL START_BYTE = 852 BYTES = 7 FORMAT = "F7.2" DESCRIPTION = "The distance from the spacecraft to the target body center in kilometers" END_OBJECT OBJECT = COLUMN NAME = SLANT_DISTANCE DATA_TYPE = ASCII_REAL START_BYTE = 860 BYTES = 8 FORMAT = "F8.3" DESCRIPTION = "The distance from the spacecraft to the intersection of the view vector with the target body in kilometers" END_OBJECT OBJECT = COLUMN NAME = NORTH_AZIMUTH DATA_TYPE = ASCII_REAL START_BYTE = 869 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "The angle in degrees clockwise from the reference axis of the observation (a line from the center to the right edge of the observation) to the direction to the sub-solar point on the target body." END_OBJECT OBJECT = COLUMN NAME = SUB_SOLAR_AZIMUTH DATA_TYPE = ASCII_REAL START_BYTE = 880 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "The angle in degrees clockwise from the reference axis of the observation (a line from the center to the right edge of the observation) to the direction to the sub-solar point on the target body" END_OBJECT OBJECT = COLUMN NAME = SUB_SOLAR_LATITUDE DATA_TYPE = ASCII_REAL START_BYTE = 891 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "The planetocentric latitude of the sub-solar point in degrees" END_OBJECT OBJECT = COLUMN NAME = SUB_SOLAR_LONGITUDE DATA_TYPE = ASCII_REAL START_BYTE = 902 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "The planetocentric longitude of the sub-solar point in degrees" END_OBJECT OBJECT = COLUMN NAME = SUB_SPACECRAFT_LATITUDE DATA_TYPE = ASCII_REAL START_BYTE = 913 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "The planetocentric latitude of the sub-spacecraft point in degrees" END_OBJECT OBJECT = COLUMN NAME = SUB_SPACECRAFT_LONGITUDE DATA_TYPE = ASCII_REAL START_BYTE = 924 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "The planetocentric longitude of the sub-spacecraft point in degrees" END_OBJECT OBJECT = COLUMN NAME = SOLAR_DISTANCE DATA_TYPE = ASCII_REAL START_BYTE = 935 BYTES = 10 FORMAT = "F10.5" DESCRIPTION = "The distance from the center of the image on the target body to the center of the Sun in AU" END_OBJECT OBJECT = COLUMN NAME = SOLAR_LONGITUDE DATA_TYPE = ASCII_REAL START_BYTE = 946 BYTES = 10 FORMAT = "F10.3" DESCRIPTION = "The solar longitude (L sub S) at the time of image acquisition in degrees from the Martian vernal equinox." END_OBJECT OBJECT = COLUMN NAME = LOCAL_TIME DATA_TYPE = ASCII_REAL START_BYTE = 957 BYTES = 10 FORMAT = "F10.4" DESCRIPTION = "Local solar time in decimal hours from midnight at the center of the observation" END_OBJECT OBJECT = COLUMN NAME = STEREO_FLAG DATA_TYPE = CHARACTER START_BYTE = 969 BYTES = 3 FORMAT = "A3" DESCRIPTION = "Indicates whether this observation was intended to be part of a stereo pair. (YES or NO)" END_OBJECT END_OBJECT END